Coolidge Artificial Turf logoCoolidge Artificial TurfCoolidge, AZ
Xeriscape + Turf Combo Design photo

Coolidge Artificial Turf

Xeriscape + Turf Combo Design in Coolidge, AZ

Xeriscape and turf combo design in Coolidge, AZ. Mix drought-tolerant beds with synthetic lawn zones for lower water bills. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Coolidge and nearby communities.

A full-turf yard isn't always the right call, and neither is an all-rock yard that bakes in July with nothing green at all. Coolidge Artificial Turf designs combo yards that pair turf zones with decomposed granite, rock borders, and drought-tolerant plantings, so you get usable green space without a water bill that climbs every summer.

This approach works especially well on the larger agricultural-era lots common around Coolidge, where a full-lawn conversion can run expensive but a well-placed turf zone paired with xeriscape beds covers the yard for a fraction of the cost.

What's included

What's Included

  • Typically included — zone mapping, turf installation in designated areas, decorative rock borders, transition edging between zones
  • Optional — drought-tolerant plant installation, drip irrigation for plant beds, decorative boulder accents
  • Customer prep — let us know which areas matter most for usable green space before the design walkthrough

How it works

How Our Xeriscape + Turf Combo Design Process Works

  1. Landscape concept design photo
    Step 1

    Landscape concept design

    We balance turf areas with drought-tolerant plantings and hardscape in one plan.

  2. Zone mapping photo
    Step 2

    Zone mapping

    Turf, rock, and plant zones get mapped out before any digging starts.

  3. Soil and rock prep photo
    Step 3

    Soil and rock prep

    Soil gets prepped differently for turf zones versus planting beds.

  4. Turf section installation photo
    Step 4

    Turf section installation

    Turf goes in per the design plan, not as an afterthought.

  5. Plant bed integration photo
    Step 5

    Plant bed integration

    Drought-tolerant plants and rock features fill in around turf zones.

  6. Design finishing touches photo
    Step 6

    Design finishing touches

    Borders and transitions get refined for a cohesive final look.

Materials

Materials and Methods for Xeriscape + Turf Combo Design

A combo yard only works if the materials transition cleanly between zones. We plan for that from the start.

  • Mixed-zone turf fibers photo

    Mixed-zone turf fibers

    Turf suited for both sun-exposed and partially shaded sections of a combo layout, since a Coolidge yard rarely gets uniform light all day.

  • Decorative rock borders photo

    Decorative rock borders

    Rock defines clean boundaries between turf and planting areas instead of a messy dirt transition.

  • Drought-tolerant plant stock photo

    Drought-tolerant plant stock

    Low-water plants fill the non-turf zones and hold up to the same heat the turf is built for.

  • Permeable paver accents photo

    Permeable paver accents

    Pavers let water through while adding visual contrast against turf sections.

  • Mulch ground cover photo

    Mulch ground cover

    Mulch cuts evaporation in planted beds, which matters when every drop of water costs more out here.

  • Edge transition strips photo

    Edge transition strips

    Strips keep turf and rock/gravel zones separated cleanly over time instead of migrating into each other.

Timeline

How Long Does a Xeriscape + Turf Combo Design Take?

Timeline depends on how much of the yard is turf versus hardscape and planting.

  1. 01

    Design consult

    same day
  2. 02

    Zone layout and material ordering

    2–3 days
  3. 03

    Install (turf, rock, planting)

    2–4 days

    depending on yard size

  4. 04

    Final walkthrough

    same day

Need a schedule that fits?

Get a Free Estimate

Cost

What Does a Xeriscape + Turf Combo Design Cost in Coolidge?

Cost scales with how much of the yard is turf versus gravel/planting, since turf runs more per square foot than rock. Call for a free estimate based on your yard's layout.

Project typeTypical rangeWhat’s included
Minimal turf accent with xeriscape majority$3,500–$7,000,small turf zone with rock and plant beds filling the rest.
Balanced combo design$7,500–$14,000,roughly even split of turf and xeriscape zones.
Turf-forward combo with accent beds$12,000–$20,000,larger turf coverage with xeriscape border detailing.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Codes & permits

Permits and Codes for Xeriscape + Turf Combo Design

Check with Pinal County or your HOA before starting, especially if your community has a plant palette requirement.

Typically needs a permitOften no permit
Drip irrigation line installation tied into existing plumbingTurf installation in designated zones
Retaining wall or significant grade changes for drainage zonesDecorative rock
—mulch
—or plant bed placement without structural changes

DIY vs pro

DIY vs Hiring a Pro for Xeriscape + Turf Combo Design

DIYHire a pro
Simple rock or mulch bed additions around an existing lawn are reasonable to do yourselfZone planning between turf and xeriscape needs to account for drainage flow across the whole yard, not just each section in isolation
Works fine for small accent areas without drainage planningTurf edges against rock or gravel need proper edging material or they shift and mix together within a year
—A professional design keeps water runoff moving the right direction instead of pooling at the lowest point in your yard

When to call

When to Call for Xeriscape + Turf Combo Design

Call Coolidge Artificial Turf for a free design consultation and estimate.

  • You want green space without a full-lawn water bill
  • Your current all-rock yard feels harsh and has zero usable green area
  • You're planning a full yard remodel and want a mixed design from the start
  • An existing dead lawn needs partial turf replacement, not full coverage

FAQs

Xeriscape + Turf Combo Design FAQs

How much turf should I include in a combo design?

It depends on how you use the yard. Play and lounge areas usually get turf; borders, side yards, and low-traffic zones work well as xeriscape.

Does combining turf and xeriscape actually save water?

Cutting lawn square footage by even half typically drops outdoor water use significantly, since turf needs zero irrigation once installed.

Can I add xeriscape later if I start with full turf now?

Though it's more cost-effective to plan the zones together from the start so drainage and edging line up correctly the first time.

What plants work best next to artificial turf in Coolidge?

Low-water, native or desert-adapted plants hold up best and won't need irrigation runoff that could undermine the turf base.

How much does a combo design cost compared to full turf?

Combo designs typically run less than a full-turf yard since rock and planting cost less per square foot than turf, materials and labor included.

Next step

Get a free estimate from Coolidge Artificial Turf today.

---

More: Home · Contact

Ask about Xeriscape + Turf Combo Design

Tell us about the project and how to reach you.

Call (928) 766-4895